Major Points To Remember While Choosing Your Underfloor Heating System

UFH or Underfloor Heating is a brilliant and unique heating process has been invented by the Romans to heat their marble floors. This is a space-saver and makes sure that your room and house remains warm and comfortable even during extremely cold days and nights. However, underfloor heating depends on from home to home and not all underfloor heaters suit every home. Underfloor heating repairs are done by various companies who guide you through the installation of underfloor heaters as well making sure that your heater suits your home perfectly.

Types Of Underfloor Heating System
Underfloor heating systems are of two types and both of them contribute to the heating equally. They are –
Hydronic Underfloor Heating System
Electric Mat System

Hydronic Underfloor Heating System
This system uses warm water as its major requirement. It includes a heater or a boiler. The plastic pipes that hold the water are located between the sub floor and the finished floor. The temperature remains between 75 degrees to 90 degrees.

Electric Mat System
Cables are placed inside or with a mesh mat or any other mat of good material. These are further attached to a power supply or preferably, a thermostat. If you are in Surrey, the underfloor heating contractors and gas engineers in Surrey are extremely hard working and dedicated towards their work.

An electric system is cheaper during installation but eventually, it becomes the costlier option between the two due to its electricity consumption.

Cost And Prices Of Underfloor Heating
Honestly, the cost varies due to a number of factors. Primarily, it depends upon what kind of product you are using and the popularity of your underfloor heating company from whom you are buying the product. Also, when your licensed contractor would install the product, he would be putting stress on the room size, ceiling length and capacity of the room. He would also see what temperature would be okay for each room.

It is highly recommended to do install your underfloor heating system before you finish with the final flooring and after you have completed the sub flooring so that, you don’t have to remove the top flooring again in order to install the product. Also, this saves time and energy immensely.

As highlighted earlier, water based system, though cheaper to install would need more cost for its maintenance than an electric system. Also, it is really tough to install the water-based system in houses that have already been made, so people generally go for electric systems. In a water-based system, the thick pipes are hard to maintain and harder to install whereas, the electric system consists of thin wires which can be installed within no time and doesn’t require much of an effort in terms of maintenance.

Pros
There are many good points of having an underfloor heating system. Some of them are –

Distributes the heat to every part of the room properly.

Extremely cost-effective. Also, if it breaks down, underfloor heating repair is budget friendly too.

If you are in a dilemma, do consider the underfloor heating contractors or the gas engineers of Surrey for any kind of trouble at home or at your workplace. They would help you with your new house or the renovation of your old one with best prices and excellent work.

Importance Of Good Servicing Of Appliances

Seeing as how they form an integral part of our day to day life, it is our duty to see that our appliances last long and have a healthy life as well. We have come to rely on this gizmos so much that it would be a shame if our devices malfunction suddenly and dig into their early graves. Since most electric appliances are expensive, we have to be very careful while handling them.

Air Conditioners
One of the most used appliances is air conditioner. It is a device that uses a fan to distribute conditioned air. It improves thermal comfort and indoor air quality, putting it the top ten appliances you must have.

Air conditioning makes deep plan buildings possible which would have otherwise been built narrower to facilitate natural ventilation. They are also handy for taller buildings that do not allow for air ventilation because of great wind speed. They are constantly used in facilities to maintain a constant environment.

Need For Good Air Conditioning Services
Since these devices are very important, they need regular servicing to prevent the complete breakdown of a unit. It is seen that regular servicing helps reduce the cost of repairs in the long run. Proper servicing makes a unit work more efficiently and last longer as it takes care of minor problems at an early stage. It also provides protection against the effects of wear and tear.
Who Are Building Service Engineers?

Building service engineers are trained professionals that are responsible for services responsible for the functioning of a building. They look after the lighting, power, ventilation, cooling etc. They are responsible for a building way before its construction begins till it remains functional. You can see how crucial a good building engineer is to the building.

A growing emphasis on sustainability puts building service engineers in Surrey in a pivotal position as they are developing new technologies to help a building system functions efficiently and lowers its carbon emissions. They apply a range of skills and special knowledge to tackle the issues of sustainability and maintenance with increasing focus.

How A Building Service Engineer Help You?
-Ability to tackle problems skilfully
-Analytical skills
-Communication skills
-Teamwork
-Numeracy
-Time-management
-3D visualization and IT competence

This job calls for both office and site work with the amount of time spent in each location varying with the role and sector. No longer separated into electrical and mechanical roles, this profession is getting multidisciplinary and diverse, giving rise to new opportunities and areas to specialize.

While building service jobs generally focus on one energy system in a building like heating systems and electrical distribution, the profession has expanded to lighting, ventilation, air-conditioning, water supply, sanitation, safety systems, lifts escalators and acoustics.

This is a very important role as it looks after both our natural resources and public safety. Travelling on any working day is quite frequent and skilled workers are employed to install and maintain eco-friendly technologies. 

Temperature control in boilers

The boiler temperature control acts as a limit control switch, meaning it can be made to open when temperature rises and made to close and/or open when the temperature goes down. This is possible because it has a temperature sensing element. The switch also acts as the central link between the burner and circulator operation. The three types of boiler temperature control are: single acting, dual acting and triple acting.

Although it is not a must to understand how these work since you can always rely on services  of boiler repair Surrey or boiler installation experts in Guildford, it helps a lot for those who want do one of two minor maintenance tasks on their own. Remember, any boiler will require you doing regular maintenance work, and you do not have to call boiler repair experts in Surrey or professionals in boiler installation in Guildford. Doing maintenance practices on your own helps save on costs.

1. Single acting boiler temperature control: This control acts like an on – off switch and is high limit function type of control. It is set to close on a high limit, i.e. the maximum temperature the boiler can attain. It means the boiler is set to turn off on reaching this point – in fact, it is set at 10° less than the high limit setting. The burner can still turn on if called upon to heat. The control in the low limit – which is set at 10° higher than the low limit temperature – is set to start on the burner. However, the burner can still turn off if there is no need for heating. Two single acting boiler temperature controls can be used to control the low and high limit: one is set for high and the other for low limit.

2. Dual acting: Boiler repair experts in Surrey or those who do boiler installation in Guildford can install this type when you need services of a single acting control and a circulator terminal controller. So this type has a high limit/differential function along with controlling the circulator, with the former acting as a single acting temperature control while the latter plays the role of energizing a circulator to distribute heat transfer fluid to heated zones. The circulator is turned on and off by a thermostat as dictated by sensed temperature in the heated space. The circulator is turned off by the opening of the temperature control if temperature falls below the low limit, in order to maintain minimum boiler temperature.

3. Triple acting boiler temperature control: This type has a high and low limit with differential functions, but it adds in a relay to energize the circulator. The high and low limits work the same way as in a Single Acting Boiler Temperature Control. Just as is the case with the Dual Acting Boiler Temperature Control, the thermostat controls the opening and closing (turning on and off) of the circulator. When the temperature of the water drops below the low limit, the circulator is turned off by the opening of the temperature control, and this action helps to maintain a minimum boiler temperature.

Air Conditioning Services to Take Care of Your AC Unit

The air conditioning unit at your home might become faulty during the summer season, which is the worst thing to face. This is the peak time of the year when you require your AC the most. As a result, the machine undergoes a lot of pressure to cool the interiors of your house. The moving parts inside the unit bear a lot of wear and tear, which might result in frequent problems in the unit. Thus, it is important that you maintain your AC properly throughout the summers. With the help of reliable air conditioning services in your town, you do not have to deal with the scorching heat on account of your AC damage. So, whenever you sense something abnormal with the functioning of your air conditioner, call upon the technician to fix it up.

Do ensure that you hire someone who is well conversant with the job and offers you immediate service during these hot months. Any kind of delay in servicing your AC might result in further damage and can even be expensive. The air condition servicing companies offer you some basic services of the unit, which can ensure its smooth functioning.

Air Conditioning Filters:
The filters in an air conditioner require the most amount of maintenance. Generally, filters last for three months but when put to constant use during the summers, they need checking frequently. Dirty and clogged filters block the normal flow of air and reduce the efficiency of the system. This in turn also affects the capacity to absorb heat by the coil. Replacing dirty filters can help in lowering the energy consumption of your AC by almost 5% to 15%. When you hire building services engineers for AC maintenance works, they usually advise you to replace the filters for the smooth functioning of the system. This service is quite affordable as well and helps you to save a lot on energy bills.

Air Conditioning Coils:
The evaporator coil of your AC is prone to collect a lot of dirt over the time. The technician who arrives for maintenance service also checks and cleans this part so that the coil can absorb more heat. You must also take care to minimize the amount of debris near the condenser. Clean the area around the coil, trim foliage and remove any kind of dirt to ensure sufficient flow of air around the condenser unit.

When you hire a professional for air conditioning services in Surrey, make sure he does the following:
The right amount of refrigerant must be checked.
He must use a leak detector to test any refrigerant leaks.
He must capture the refrigerant that evacuates from the system instead of releasing it illegally in the atmosphere.
Must check whether the thermostat is accurate.
Oil motors and inspects the belts for wear and tightness.
Measure the flow of air via the evaporator coil.
Must apply a non-conductive coating if essential and should also tighten and clean connections.

These regular maintenance tasks of the air conditioning unit by a service technician help you to find out and fix problems in the system with ease. 

Tips on working with hot oil systems

Having good hot oil heating system and any other thermal fluid heating system requires selecting an efficient system as well as implementing safe handling procedures and methods, and regular, proper maintenance practices.

Surrey heating services and gas engineers Surrey will tell you that it is important to have a heating system that is specifically designed for your facility in order to meet process needs. For systems that operate with a bulk temperature of above 500 degrees Farads, it is advisable to use an insulated gas blanket expansion tank. Where the temperature is below that but above 140 degrees Farads, it is advisable to have a cold seal pot.

Designing, building and operating an oil heat transfer system requires careful planning from the word go, in order to end up with a cost-effective system that fulfills its mandate.

Here are tips on how to go about it:

1. Plan the layout: There are endless options when it comes to layouts, and do not pick any layout for your factory. You can work with typical layouts from Surrey heating services or a Gas engineer in Surrey, and they can help you select the best for your circumstances.

2. Select components wisely: The components to select include valves, pumps, piping, threaded installations and flanges. Others are nuts, gaskets, insulation and studs. You need to go for components designed to meet your system's temperature level. Other factors to consider include careful selection of material and features for each component: for instance flanges should be of 300 lb forged steel construction, insulation can either be Calcium silicate or fiberglass rated to 850 degrees Farads, and pipes should have back-welded connections or having thread sealants.

3. Safety: Surrey heating services and gas engineers in Surrey will consider the potential of fire in the design. Laboratory testing of unused fluid is used to determine flashpoint and fire point of the system. They mainly use ASTM D92 Cleveland Open Cup (COC) method. They will put into consideration all the conditions that should help prevent vapor ignition. In addition, they must check that there are no leaks because they can present danger for fire.

Engineers also think about catastrophic equipment failure to prevent dangers and downtime. Proper design, operation and maintenance should eliminate that.

Engineers will also train your staff with regard to maintenance, storing the fluid, filling the system with fluid and removing air pockets to ensure safe fluid handling.  

Custom Installations with Quality Service for Lasting Value – BTU Group

Have you ever considered how efficient installations of heating systems, air conditioners, and ventilation can save a ton of money for our household or offices? A controlled flow of energy at homes and corporate workplaces help a lot in saving electrical bills.

BTU installations located in London is an installations and maintenance firm dedicated to providing quality services to people utilizing alternate sources of energy. They cover building services, boiler installations, mechanical and electrical engineering works. Apart from installations, BTU does full-time services in maintenance and repair works. With over 50 years of experience in hand, BTU installations have come up with cleaner and safer solutions to deliver long-term value services.

Heating and boiler services
For a relatively colder climate, a heating system is an inbound necessity to keep homes and work areas warm. Air conditioning systems and warm air heating installation are done precisely on time by BTU for residential and corporate buildings. They will guide you in choosing an energy efficient boiler system to meet your requirements. The latest technology is incorporated in their services time to time. An ozone friendly heating unit with inverter drive technology is the current trend in their installations.

Skilled workforce
BTU comprises of efficient engineers and dedicated man force with a unique set of installers, contractors who extend their services in London, southeast side, and Surrey. They handle public sector works and private sector dealings along with schools and hospitals. BTU installations have come up with using an alternative and cleaner source called CHP for energy generation.

Customer service
BTU offers tailored services and sustainable installations to customers as per their needs. Gas engineer Surrey brings the best of boiler systems to you. After installation periodic maintenance is required for smooth run of machinery.  BTU employs contractors for building and construction works who install best ventilation systems on their job.

The repair and maintenance works are handled 24/7 throughout the year. Emergency service staff is fully trained in technical and safety works. The comfort and safety of the clients are the primary goals of this company.

The Most Energy-Efficient Ways of Using Air Conditioner

Be it at your workplace or home, air conditioning keeps you cool during the warm temperatures. As the temperature rises, the functioning of air conditioning system can get affected which makes you feel uncomfortable owing to the excessive heat.

As we all know that the energy prices are becoming higher and higher day by day, efficient use of the air conditioners is recommended. This ensures that you are saving on your pockets and also helping the environment. The following factors if kept in mind can help in the proper functioning of your air conditioners.

The Thermostat Should Not Be Changed Often: There is no need to change the setting of the thermostat quite often. The change in temperature of the thermostat does not affect the cooling capacity of the air conditioner. The standard temperature to which you must set the thermostat during summer is 24 degrees and during the winter is 22 degree Celsius. This trick helps in the efficient working of your machine for a long period of time.

Insulate The Building Or Home: The ceilings, roof spaces, pipes, and walls must be insulated properly to reduce the loss of heat during winter and heat gain during summer. You must also insulate the cold and hot air ducts.

The Window Must Be Shaded From Outside: To decrease the temperature of the room during summers, use of awning, blinds, shutters and drapes can be of great help. This prevents excess sunlight from entering the rooms.

Timer Must Be Set: In case you are using the machine at your office, the use of timer can be beneficial. This means that your air conditioner works only during the office hours. Thus, the office remains cool till the time it is in operation. Now-a-days, most of the machines come with a seven-day timer facility in the controllers so that you can easily control the usage of the air conditioner.

Double-Glazed Windows: This technique prevents excess heat from entering the room during the hot months and also reducing the amount of heat lost during winters. This, in turn, saves a lot of energy consumption of your air conditioner.

Proper Maintenance: In order to ensure the smooth functioning of your air conditioning unit, proper servicing and maintenance is important. You must check the guide that comes with the unit. This helps in inspecting the fans and cleaning the filters so that an effective system can be maintained. You must get the unit checked by a specialist at least once a year. Air conditioning services done by experts ensure that your machine runs in tip-top condition for a long time period.

The Use Of Energy Management System: This system can be used in your air conditioning unit if it cannot be controlled with thermostats and timers. You can use different temperatures of cooling and heating for various places, an optimum start of the machine and much more.
All these above factors help to reduce the amount of task that your air conditioner has to do and also helps in maintaining an ideal temperature of 22-24 degree Celsius.

Why Do You Need A Preventive Maintenance And Repair Approach?

Industrial atmosphere is very volatile and vulnerable. Especially with the replacement of manpower with extensive machinery, there is a lot that needs to be taken care of. A preventive and precautionary attitude is essential to ensure two main things:

Consistent Performance
With so much competition onboard, an industry cannot make any compromise in the quality of production. Any fault in even a small part of a plant can lead to delay and losses. Hence, the need to keep a double check upon things is quite necessary.

Safety
The work environment in each industry should be free from hazards. Though, it is not possible to control the external environment. But internal activities, surrounding and types of machinery can be monitored time to time. Also, the requirement to make improvements or repairs should never be neglected.

What Is It All About?
A preventive approach simply means an early detection of a problem through inspection or maintenance audits. It basically aims at anticipation and prevention of failures in equipment tools at an early stage.

It includes getting hold of the problem even before one can notice it. This is done by conduction of periodic assessments and checks. The specialists go through all the components of a workplace to make sure any sudden crash doesn’t occur and the operations are carried out smoothly.

Benefits of Preventive Maintenance and Repair Approach:

Reduction of Costs
Many industrialists opt for such a concept to eliminate the chances of facing any bigger problem in future. Suppose there is an important consignment due for delivery the next day and the system crashes without any intimation or sign of failure. Wouldn’t the loss of non-delivery of an order be much more than the cost of repair? Why not keep a check in advance and get the things fixed beforehand then?

It is generally seen; all the equipment tools that get detected with a problem during the initial phase of damage, they actually escalate less expensive repair and maintenance than the ones sensed later on.

Convenience
An industry is specialized to produce a certain type of output. And it does not need to look after each and everything. The same is the case with repair and maintenance needs because this can be best carried out by a professional service provider. It is very easy to find industrial heating services and industrial maintenance services providers these days. These companies make sure that a periodic visit is made to the location and their officials inspect all the equipment placed there one by one.

They also talk to the engineers, managers, employees, technicians and staff to know about their existing concerns. These people play a vital role in allowing the team to find issues faster because they are in direct contact with the internal surroundings of the workplace. The specialist might choose to talk to the staff directly. Or they may carry out a survey to make a detailed examination.

Moreover, industrial maintenance services in UK providers not only come up with the solution to an existing problem. But also give suggestions to improve the level of safety. They analyse all the possible opportunities to ensure high efficiency in industrial operations. 

Advantages & disadvantages of oil central heating boilers

Oil heating systems have their advantages and disadvantages whether the heating oil is placed on the ground or underground. The truth is, while there are many gas heating systems, there are several people still using oil heating systems out there. In rural areas where gas grids are out of reach, oil heating systems appear to be a suitable solution.

The boiler heats water and then through radiators, the central heating occurs. For details on spare parts and repair, contact oil boiler engineer Surrey for help.

Unlike with gas central heating systems where water gets heated instantly, oil-fired combination types keep water internally to supply it through pipes.

Oil heated boilers emit up to 4 or 5 tonnes of carbon yearly and you can spend about over $1000 per year for a 3 bedroom house depending on where you live.

If you looking for information about the types of oil boilers, there are two of them: heat only and a combination condensing oil fired boiler. It is necessary to ensure that the efficiency of the boiler is more than 90 percent. This will help keep minimal heating costs. Again, it will help save on maintenance. An oil boiler engineer in Surrey can help with keeping the boiler maintenance at that level.

In terms of cost comparison between an oil and gas heating systems, you will need to include the cost for buying the oil tank.

There are oil fired central heating applied in 'wet' heating systems where an oil fired boiler heats water and then central heating is done by the boiler through radiators installed in homes. The oil is also bought from time to time for use in a oil fired central heating system.


If you are planning to use an oil fired boiler for a central heating system, there are some advantages to watch out. Number one is that oil tends to be efficient and so you will save lots of cash on such a system when compared to gas systems. With modern systems that are installed by a qualified oil boiler engineer in Surrey, you can achieve an energy saving of up to 90 percent. Replacing an old boiler with a new one is also hassle-free.

Oil fired central heating systems are expensive and costly to install. If you are relying on old technology, you may experience unexpected downtime when the system runs out of oil fuel. But you could use modern technology installed by an oil boiler engineer in Surrey to enable the tank notify the supplier when fuel is running out. You might also be charged money for yearly servicing sessions to help keep the boiler efficient and reliable.

Other disadvantages include high costs when the prices of oil go up. Oil is going up in most of modern day economies. Also, unless you are keeping the and underground,it looks ugly at home environments. These types of boilers are also associated with high amount of carbon emissions.

Wall mounted boilers are hard to find, and plumbing may be required to remove any acidic condensate liquid that gets involved. Due to the rate of flow of hot water being low as the central boiler system keeps water under check to maintain hotness of domestic water, the hotness of water reduces as you use more water. 

Solving problems with gas furnaces

Different furnaces have different efficiencies with condensing furnaces recording an efficiency as high as 90 percent AFUE and above. Although both the condensing and conventional gas furnaces use gas burners with an electronic ignition and so have similar combustion process efficiency, condensing furnaces record more efficiency because they have a better heat extraction process.

Of course, there are some problems you can try to troubleshoot on your own and there are others you should trust a gas engineer Surrey to help solve.

Below are problems you are bound to notice in when working with a conventional gas furnace.

1. No heat produced: There are a number of causes if there is no heat being produced. One of them is the thermostat being set too low and not calling for heat. Another cause is if the thermostat is malfunctioning or damaged. The furnace will also not produce heat if the circuit breakers and fuses have tripped down or blown.  You need to check whether the natural gas or propane control valve has been closed or if the pilot light is out, since these too can cause the gas furnace to fail to produce heat.

Other problems that cause the gas furnaces to fail to produce heat include a problem with the hot surface ignition problem or intermittent pilot electronic ignition problem.

There are a number of ways in which you could try to solve this problem even without calling a gas engineer in Surrey. For instance, you can try to check if the thermostat is in the heating mode. Try moving the dial setting up or down, clean the contacts in the thermostat, and try to reset tripped circuit breakers too. You can also try to relight standing pilot light, troubleshooting hot surface ignition or troubleshoot intermittent pilot ignition system.

2.  Gas furnace noisy operations: If the gas is producing a “squealing” sound, it may be that the slipping blower or motor or the shaft need to be oiled. If there is a “rumble” sound, the problem could be a poorly adjusted pilot light if this is experienced when the burner is off. If the sound is being experienced when burners are turned on, it may be that the gas burners are dirty. To solve these problems without calling a gas engineer in Surrey, try oil blower motor lubrication ports (using light weight oil). You can also check if the belt tension is to the needed standards of about 1” at the center of the span or tighten it all together. The problem can also be solved by adjusting pilot light. If necessary, contact a service technician.

3. Electronic ignition problem: In more recent equipment, the gas burners are not ignited using a standing pilot. Electronic ignition is done via the Intermittent Pilot or the Hot Surface Ignition. The former uses a high voltage electrical spark that is controlled electronically. The main burners are then ignited after gas pilot, when the thermostat calls for heat. In Hot Surface Ignition system, an electronically controlled resistance heating element is used to ignite the burner. You can contact a gas engineer in Surrey to repair the parts.